top of page

What should I expect when having luxury vinyl tile flooring fitted in Fife?

Derek Newell
Oct 11
6 min read

If you've searched for laminate flooring in Fife for a shop, café or office, the honest answer is that commercial premises almost always need something tougher than domestic laminate: luxury vinyl tile. It copes with footfall, spills and daily cleaning the way laminate can't, and it's the product we actually recommend and fit across Kirkcaldy, Glenrothes, Cupar and St Andrews. If you're still weighing up which flooring suits your business, our guide on which type of commercial flooring is best for your Kirkcaldy business is a good starting point. This post covers what actually happens once you've decided on LVT.


Is laminate or LVT better for a Fife shop or office floor?

For commercial premises, LVT is almost always the better choice over laminate. Laminate is a domestic product with a thin wear layer and a core that swells if water gets under the joints; LVT is built with a dense wear layer designed for constant foot traffic, trolleys, chair castors and the spills that come with retail or hospitality use.

We don't fit domestic laminate as a trade product, and we wouldn't recommend it for a business floor even where budget is tight. Laminate's click-together core is vulnerable at doorways, under wet umbrellas and around sinks, which is exactly where Fife high street units see the most wear. Luxury vinyl tile, particularly in a glue-down (dry-back) format, seals those joints and copes far better with the coastal damp and grit that gets tracked in from harbour towns like St Andrews and Kirkcaldy's own seafront units. If your search started as "laminate flooring Fife", LVT is very likely the product you actually need.


What should I expect on the day the flooring is fitted?

Expect the old floor covering lifted, the subfloor assessed and levelled where needed, then the new LVT bonded or clicked into place, followed by trims, door bars and a final clean. The work is carried out methodically through each stage so the finished floor is flat, fully bonded and ready for trade the moment it's handed back.

Before fitting day, we'll have already surveyed the unit, checked moisture levels in the slab and agreed the product and installation method, whether that's glue-down LVT for heavy-traffic areas or a click system for lower-footfall office space. On the day itself, furniture and fittings are moved as agreed, the existing floor is removed, and any damp, uneven or damaged subfloor is addressed before a single tile goes down. Skipping that preparation step is the single biggest cause of problems later, so it's never rushed, even if it adds time to the job.


How long does fitting take in a Kirkcaldy shop or office?

A typical commercial LVT installation takes a few days from strip-out to handover, though the exact time depends on the size of the unit, the condition of the existing subfloor and whether screed or levelling compound needs to cure before fitting. Smaller units or single rooms can move faster; larger retail or office floors with complex layouts take longer.

Older buildings on Kirkcaldy High Street, Cupar's town centre units and St Andrews' listed shopfronts often have uneven stone or timber subfloors beneath later coverings, and bringing those up to a level, sound base for LVT can add time that isn't visible once the job's finished. We'll always flag at survey stage if we expect this, so there are no surprises on your opening day deadline.


Will my business have to close while the flooring is fitted?

Many commercial LVT jobs can be scheduled around your trading hours, with work done overnight, over a weekend or in phased sections so the business doesn't need to shut completely. Full closure is sometimes unavoidable, particularly where screed needs to cure, but it's something we plan for upfront rather than leaving you to find out on the day.

If a short closure window is non-negotiable, tell us at the quoting stage. We'll build a programme around it, including whether adhesive cure times or moisture readings in an older slab mean the job has to run over more days than you'd like. Being upfront about a tight deadline, rather than hoping it'll be fine, gets a far more realistic plan.


What subfloor problems come up in older Fife buildings?

The most common issues are uneven floors, residual damp in older slabs and old adhesive or tile residue left by previous coverings. Each needs addressing before LVT goes down, because fitting over a poor subfloor is the main reason tiles lift, gap or show every dip in the floor beneath.

Many commercial units across Kirkcaldy, Glenrothes and the older parts of St Andrews and Cupar sit on original solid floors that have had several coverings over the decades. Moisture readings matter here, particularly in ground-floor units near the coast or on sites with a history of damp. Where readings are high, we use appropriate damp-proof membranes or levelling systems rather than simply fitting over the problem, because that's what causes tiles to fail months later rather than straight away.


What are common problems with LVT flooring and how are they avoided?

The most common LVT problems are tiles lifting at joints, visible subfloor imperfections telegraphing through, and indentation from heavy furniture or equipment left in one spot. Nearly all of these trace back to inadequate subfloor prep or the wrong product being specified for the level of traffic.

Choosing the right wear layer and installation method for your specific use matters more than the brand name. A café kitchen needs a different spec to a quiet reception area. We'll always match the product to how the space is actually used, which is part of why a proper site survey happens before any quote is finalised, not after.


How long does LVT flooring last in a busy commercial setting?

Commercial-grade LVT, properly specified and fitted, is designed to withstand years of continuous business use when it's maintained with the right cleaning regime. Lifespan depends heavily on footfall, the wear layer thickness chosen and how the floor is cleaned day to day, so it varies from site to site rather than being a fixed figure.

Honestly, no flooring lasts forever in a high-traffic retail unit, and heavy trolleys, grit and harsh cleaning chemicals will shorten the life of any floor covering over time. What we can control is specifying a product suited to your actual traffic levels and fitting it correctly, which is the single biggest factor in how long it holds up.


What drives the cost of LVT flooring in Fife?

Cost is driven mainly by the size of the area, the condition of the existing subfloor, the product specification chosen and the installation method, rather than a single flat rate per square metre. A unit needing significant subfloor preparation will cost more than one with a sound, level base, even if the flooring product itself is identical.

Rather than quote a figure that won't hold true for every site, we survey each job individually: a Kirkcaldy office with a reasonable concrete base is a very different quote to a Cupar high street unit with old, uneven flooring beneath several layers of previous coverings. That survey is where you get an honest, specific cost for your premises, not a generic estimate.


FAQs


Do I need to empty the unit before fitting starts?

Yes, in most cases furniture, stock and equipment need to be cleared from the work area before fitting begins, though we'll agree exactly what needs moving and by whom as part of the planning for your job.


Can LVT be fitted over existing flooring?

Sometimes, if the existing floor is flat, stable and suitable as a base, but it depends entirely on what's already down. An on-site survey will confirm whether removal is needed or whether fitting over is appropriate.


Is LVT suitable for areas with heavy spills, like cafés and kitchens?

Yes, glue-down LVT with a suitable wear layer is a strong choice for areas with regular spills, since fully bonded joints resist water ingress far better than click systems or domestic laminate.


What's the difference between click LVT and glue-down LVT?

Click LVT is a floating floor that clips together without adhesive, while glue-down LVT is fully bonded to the subfloor. Glue-down generally suits higher-traffic commercial areas better, as it won't shift or gap under heavy or constant use.


Does DNA Contract Flooring work outside Kirkcaldy?

Yes, we cover Kirkcaldy, Glenrothes, Cupar, St Andrews and the wider Fife area, as well as Edinburgh and Dundee.

If you're planning a new floor for a shop, café, office or any other commercial space in Fife and want an honest assessment of what your premises actually needs, get in touch with DNA Contract Flooring and we'll arrange a site visit.

 
 
 

Comments


bottom of page